Burn-Off Furnaces
The clean pyrolysis burn-off process is free of hazardous emission. It is a non-chemical & toxic cleaning process for removing paint & plastic coating on metal parts to support a green, sustainable and healthy environment. Burn-Off furnaces comply with the strictest environmental guidelines for safe removal of coatings or pollutants from any metal parts.
Applications
- Motor Rewind Industry - stripping electric motor stators, armatures, transformers & field coils without damage to base metal. The cleaning process complies with the Motor Rewind Standards.
- Paint Jig Cleaning - removal of Paints, Epoxies, Powder Coatings without any mechanical damage or distortion to the products.
- Plastic Tooling - for pollution-free cleaning use heat to remove Plastics or Polymers from tools such as Spinnerettes, Screen Packs, Breaker Plates, Moulds, Dies, Pumps, Nozzles, Tips, Mixers and Extruder Screws, etc.
Key benefits:
- eliminates the use of dangerous chemical cleaning agents (chemical solvents)
- no hazardous chemical handling or costly waste disposal
- process is completely automatic and the process is labour efficient
- constructed and tested at the factory to reduce site installation time and costs
- equipped with water-spray system for control of smoke emission and over-heat
- no damage to parent metal when compared to mechanical cleaning processes that use scrapers, wire brushes, drills or blow torches
- efficient incineration of smoke and gases during cleaning
- pollution free - heat process removal of thermal degradable coatings or organic materials from metal parts
- recorder provides evidence of work done
- Unique microprocessor control system with touch-screen interface for easy control setting and diagnostic review functions
- complies with stringent environmental regulations
- operates on either LP Gas, Natural Gas or light fuel oil.
- Over 100 units in Australia and New Zealand. Over 4000 units worldwide.